Copy
View this email in your browser
MAGREMOVER POWDER

Special Flux to Remove Magnesium
from Aluminium Alloys
MAGREMOVER POWDER

PRODUCT DESCRIPTION: 
Pressure Die Casting Alloys are indeed to keep Magnesium at low percentage. Higher percentage Magnesium in PDC Alloys creates Embrittlement, Poor Fluidity and brittleness problem. To avoid these problems Magnesium percentage in these Alloys should be kept at a low percentage. Magnesium percentage mainly depends on Magnesium present in the recycled scrap. To reduce the magnesium to required percentage Magremover– Powder is recommended.
 

APPLICATION :
The addition rate of Magremover-Powder varies and depends upon the initial Level of Mg content and % of magnesium to be removed. Spread Magremover- Powder flux on the molten metal surface uniformly. During addition, rabble the Melt uniformly along-with Magremover Powder. After complete addition of flux hold material for 20 minutes in the furnace keeping the burner on low flame. After completion of reaction again rabble the melt uniformly, remove the dross and analyse the melt for Mg content, and carry out further treatment if necessary. It is recommended to add 7-10 kg Magremover Powder to remove 1 kg of magnesium from molten metal, for melt having initial Mg content 0.5% and above. To remove Mg from molten metal having lower percentage of Mg i.e below 0.4%, Magremover –Powder addition increases and it may go up to 10-14 kg to remove 1kg of magnesium from molten metal. This can be further assisted by lancing the melt with Nitrogen / Argon. Magremover-Powder can also be injected below the molten metal surface to further improve the efficiency of the treatment. However during bulk usage it is observed that the requirement of Magremover Powder varied from 8-25 kg to remove 1 kg Mg. Shop floor conditions , skill of operator, molten metal temperature and treatment process are not in our control. End user to standardize their process to get the best output from our product.

ADVANTAGE:
1. Can be used as Surface treatment or with Flux Injection Machine.
2. Free from pungent smell and heavy smoke.
3. Environmental friendly.

APPLICATION TEMPERATURE: 740-760°C for better results.

STANDARD PACKING: 25 kg, 5kg polyethylene bags packed in 50 kg HDPE Bag.

PRECAUTION:
FLUX IS HYGROSCOPIC IN NATURE SO STORE IT IN COOL AND DRY ATMOSPHERE.

 

CERAFLUX INDIA PVT LTD is an ISO 9001-2015 certified company exporting to more than 14 countries all over the world. Over 25 years of industry experience into the manufacturing of Foundry Chemicals with and have wide range of products for Ferrous, Non-ferrous & Steel foundries such as Fluxes, Degasser, Grain Refiners, Die cotes, Non-wettable Refractory Shapes for Aluminum, Refractory Coatings, and Binders. We also, customize and develop the products as per the customer requirements. We have three 3 manufacturing units located in the western part of India for manufacturing Powder, Paste, Liquid (water/oil/spirit) based products and also Aluminum - Master alloys in different forms (waffles/ingots/coil/rod) and various other products.

CERTIFICATIONS AND AWARDS:
• ISO 9001:2015 Certification from TUV NORD
•  NSIC-CRISIL Rating- SE 1A* ‘Highest Performance Capability & High Financial Strength’
 

CONTACT US:
CERAFLUX INDIA PVT. LTD.
Plot No F-59 & F-60 Gokul Shirgaon MIDC,
Kolhapur – 416234 State-Maharashtra Country-INDIA
E-mail: marketing@ceraflux.com , info@ceraflux.com
Mob: +91-8380099227  

Website: www.ceraflux.com


CERTIFICATIONS AND AWARDS:
• ISO 9001:2015 Certification from TUV NORD
•  NSIC-CRISIL Rating- SE 1A* ‘Highest Performance Capability & High Financial Strength’
 
CONTACT US:
CERAFLUX INDIA PVT. LTD.
Plot No F-59 & F-60 Gokul Shirgaon MIDC,
Kolhapur – 416234 State-Maharashtra Country-INDIA
E-mail: marketing@ceraflux.com , info@ceraflux.com
Mob: +91-8380099227  
Website: www.ceraflux.com






This email was sent to <<Email Address>>
why did I get this?    unsubscribe from this list    update subscription preferences
CERAFLUX INDIA PVT LTD · Floor 59 Plot No · F-60 Midc, Gokul Shirgaon, Kolhapur, Kolhapur · Kolhapur 416234 · India

Email Marketing Powered by Mailchimp