Newsletter February 2014
View this email in your browser
Hello Andrea

In today's Product Newsletter we have chosen 3 products from 3 different suppliers.

An Isolated Transceiver by NVE, SDRAMs by Alliance Memory and a Micro Vibration Sensor by Sensolute.

All 3 suppliers have proven industry experience in their field of expertise.

Best regards
Your Active Team
Isolated Transceiver

RS-485 transceiver, IL3085

NVE's low-cost isolated RS-485 transceiver has best in class specifications and unmatched reliability for rugged environments.
Its unique narrow-body versions, designated with the -3E suffix, are the world/s smallest isolated transceivers (just 0.15inch wide 16pin -3SOIC package is half the size of other isolators).

Key Specifications:
- 4 Mbps data rate
- 3mA typical controller-side quiescent current
- temperature range –40 to +85 degree Celsius
- 15 kV bus ESD protection
- 0.15 inch and 0.3inch 16pin SOIC package
- 50kV/
μs typ, 30kV/μs min. common mode transient immunity
- supports up to 32 nodes
- 3V to 5V power supplies
- 1000 V_RMS / 1500 V_DC high voltage endurance
- 44000 year barrier life
- thermal shutdown protection

Request a free sample
Alliance Memory, a manufacturer of memory products, has developed a new high speed CMOS SDRAM (2Mx32bit).

The devices are reliable drop-in, pin-for-pin compatible replacements for a number of similar solutions in industrial, telecom, and consumer products requiring high memory bandwidth.

Key Specifications:
- Commercial temperature range 0 °C to 70 °C
- Fast Access time 5.4/5.4ns
- Fast clock rate 166/143 MHz
- Single +3.3V (±0.3V) power supply
- Programmable mode burst lengths of 1, 2, 4, 8, or full page

An auto pre-charge function provides a self-timed row pre-charge initiated at the end of the burst sequence. Easy-to-use refresh functions include auto- or self-refresh, while a programmable mode register allows the system to choose the most suitable modes to maximize performance.

Request a free sample
Product Selection Guide for Alliance Memory products
Micro Vibration Sensor

Datasheet MVS0409_2
Halogen free and omnidirectional
Micro Vibration Sensor MVS0409.02

Sensolute logo

Tiny but multi talented.  Sensolute's micro vibration sensor records motion and vibrations through a tiny gold-plated, moving micro-ball (diameter of just 0.8mm). Even the smallest movement causes the ball to move so that this one closes or opens two gold-plated contacts. The pulses resulting from this are evaluated by application-specific electronics and are implemented in corresponding switching signals. Due to its size there are no limits to its application.

Key Specifications:
- fully-automatic SMT mountable
- gold-plated ball and contact surfaces
- low operating current, less than 0.2 µA
- R_ON < 100 Ohm
- R_OFF > 30 Mega Ohm
- Response threshold approx. 50 mg
- Temperature range -40°C - +85°C
- Dimensions (l x w x h) 2.85 x 2.45 x 1.7 mm
- Silent ball movement

Request a free sample
More about Sensors or Memory devices via email or phone +64 9 443 9500.

            Email to a colleague                                                       Feedback

>> Did you know that Active is the largest NZ owned distributor of Electronic Components? <<

Components and Custom Solutions.
Your Local Authorised Channel Partner for Mouser Electronics (Australia / New Zealand).

Email Marketing Powered by Mailchimp

Copyright © 2014 Active Components, All rights reserved.
You are receiving this email because you opted into our website.